I skateboard, listen to metal, write on my website FWNED, autocross, and love messing with new phones. If you do use a factory image, please make sure that you re-lock your bootloader when the process is complete. Once that is extracted, make sure all of the files are together like below. My nexus 6P recently went through this bootloop. Check the guidelines in this post in order to learn how to flash the files on your device.
When you extract it the first time, it should show the following files: Once these files are extracted, open a new file explorer and navigate to the location to where you installed Minimal ADB and Fastboot. fastboot flashing lock The device shall prompt you to confirm the locking process. The OEM is not unlocked in the Developer Settings, so trying to unlock it by using fastboot flashing unlock doesn't work. Be careful with the boot.img and bootloader.img though. Drag all of the contents as seen above into the Minimal ADB and Fastboot (x86) folder.
After you have done that, scroll down until you see USB debugging or Android debugging if you are on a custom ROM. Try the following thread then post after your attempts in there as well: Unlocking your device is failing because you haven't ever enabled Allow OEM Unlock or USB Debugging from within the OS. This means the drivers are properly installed and your android is successfully connected to the window PC.This article will show you how to flash the factory images for the Nexus 6P. And enter the following command and you will see the screen with a list of devices attached. Now the command prompt windows will appear on your desktop. To do this Hold Shift button on your keyboard and right-click on the empty space of the folder. Connect your phone to the PC and open a command window in your fastboot/adb folder (C:\adb\). Go to the ADB folder on your C Drive which the installer created on Step 2.
Here select the “Android ADB Interface” and click on the next button to complete the setup process. Now on the next screen you will see all the ADB drivers that are installed on your windows. From the next screen click on the “Android Device” option and hit the next button to proceed. Now from the next screen click on the “Let me pick from a list of device drivers on my computer” and hit the next button. From here click on the “Browse my computer for driver software” Now new popup windows will appear on your screen. Right-click on it and select update driver software. It will show up under Portable Devices as your phone model number or Other Devices or ADB Interface or Android.
Now connect your phone to the PC with USB cable and open Device Manager and look for your phone. And Enable Android Debugging / USB Debugging mode. Pick your phone up and go to Settings > About Phone and tap on Build Number 7 times until you’ve enabled Developer Options, then go back to the main settings menu and go to Developer Options that magically appeared right above About Phone.
0 kommentar(er)
